Wheel Spacers
These wheel spacers have been made, primarily for people buying/using the stock Datsun truck rims with our disc kit. The register nice and close to the 12mm lug bolts. Because of the "dish" on the rear drums of the Datsun trucks, some rim styles may require a spacer to mount correctly. Take your own measurements to make sure 1/8" is enough.
The bolt pattern is 6 on 5.5", which is the most common 6 lug pattern. These will probably work on almost any make/model of truck with a 6 lug hub.
The finish of the steel may vary from batch to batch, but the fit will remain constant. Since these are steel, they will rust. They may weld themselves to the brake drum if you do not take the necessary precautions to inhibit the rust.
The pictures above and this video show the difference between the typical cast aluminum spacer found at most parts stores and our laser cut steel spacer.
The bolt pattern is 6 on 5.5", which is the most common 6 lug pattern. These will probably work on almost any make/model of truck with a 6 lug hub.
The finish of the steel may vary from batch to batch, but the fit will remain constant. Since these are steel, they will rust. They may weld themselves to the brake drum if you do not take the necessary precautions to inhibit the rust.
The pictures above and this video show the difference between the typical cast aluminum spacer found at most parts stores and our laser cut steel spacer.