4 cylinder, L-Series Down Pipe Flange - Mild Steel
L16/L18/L20b
6 cylinder, L-Series Down Pipe Flange - Mild Steel
L28
3/8" HRPO, laser cut. It should be a lot harder to warp one of these than the stock flange. The stock flange is about half as thick and is typically warped by years of heat and over tightening, trying to get a good seal.
Any decent exhaust shop should be able to fabricate a new down pipe if you give them this to start with. We may offer down pipes in the future, but at the moment, there's way too many projects in line ahead of them.
Each additional flange ordered at the same time will be $10, so contact us before you order multiples.
Any decent exhaust shop should be able to fabricate a new down pipe if you give them this to start with. We may offer down pipes in the future, but at the moment, there's way too many projects in line ahead of them.
Each additional flange ordered at the same time will be $10, so contact us before you order multiples.
______________________________________________
Stainless Steel Flange
There are no plans to offer down pipe flanges in stainless in the future. If you are looking to have a SS down pipe made, contact our friends at namelesperformance.com They already have the SS flange cut from the same artwork, but they have the capability to custom fab a SS down pipe for you. It might not be cheap, but it will be perfect.