Buyer is completely responsible for correct installation,
use of these products and any liability arising from their use.
PRODUCTS:
NISSAN Hardbody D21
Hardbody D21 Adjustable Upper Control Arms (click for more info) ***NO LONGER AVAILABLE***
The custom cross shafts are machined from 6061 aluminum. When completed with the required parts, they provide far more caster/camber adjustment than can be obtained by shimming the stock UCA. They are designed to bolt into the factory position with the factory bolts.
The hardware in the pictures is not included and only shown for reference. This hardware is readily available from other sources, such as Speedway. The ball joint used is a Chrysler 772 unit and is available in many different configurations from other suppliers. The price is for a pair of cross shafts only, shipped in the US. I will provide a list of the rest of the parts, either via email or it will be made available on this site.
***NO LONGER AVAILABLE***
DATSUN TRUCKS - 320/520/521/620 (1963-1977) with drum brakes and king pins
320/520/521 Aluminum Disc Brake Upgrade Kit (click for more info) ***NO LONGER AVAILABLE***
Kit allows later model hubs/rotors/calipers to mount onto the stock kingpin suspension with a simple modification to the spindle. This kit uses '87 D21 rotors, not 720 rotors as the previous kit did. Hubs from multiple years of Nissan trucks can be used, but some may require modification to clear the center holes of your rims. Follow the links for more info on the hubs.
This is the aluminum version of the previous steel kit, but does not require the wheel spacer to fit stock 14" steel rims.
***NO LONGER AVAILABLE***
click here for ADDITIONAL PARTS REQUIRED, NEW and DONOR
click here for INSTALLATION info
620 Aluminum Disc Brake Upgrade Kit (only for drum (pre-'78) 620) (click for more info) ***NO LONGER AVAILABLE***
click here for ADDITIONAL PARTS REQUIRED, NEW and DONOR
click here for INSTALLATION info
320/520/521/620(drum) Urethane UCA Bushings (click for more info) ***NO LONGER AVAILABLE***
This kit comes with one piece, modified Energy Suspension bushings (88A durometer), custom made Acetyl washers and steel sleeves, grease and mounting hardware. The kit will do both sides of the vehicle.
We have a couple of sets in red. Let us know in the notes or contact us.
Spacer Set for 320/520/521 Inner Bearing Replacement (click for more info) ***NO LONGER AVAILABLE***
DATSUN 311 Roadster (already equipped with disc brakes)
311 Roadster Disc Brake Upgrade Kit (click for more info) ***NO LONGER AVAILABLE***
This kit is used to push the stock hub out far enough(approx. 1/8") so that a modified '96 Altima rotor can be mounted to the stock hub. The rotor needs to have the center hole opened up to fit the backside of the hub. The rotor and machine work need to be obtained elsewhere. A stainless steel caliper spacer is used to mount/center Volvo calipers. This kit only fits the Roadsters already equipped with stock front disc brakes.
The feedback from customer is that the stock, dual reservoir master cylinder works well with this upgrade.
DATSUN 410/411
DATSUN - misc
L-Series(4 cyl) Exhaust Downpipe Flange 3/8" Mild Steel ***NO LONGER AVAILABLE***
contact Martin to buy them.... clevermartin01@gmail.com
The stock down pipe flange is thin and warps easily. Any exhaust shop can make you a new down pipe with this flange. Contact us for a discount before ordering multiple sets.
I SOLD THE REMAINING STOCK TO MARTIN. HE WANTS TO START MAKING
DOWN PIPES WITH THEM. HE HAS THE FLANGES FOR SALE. HIS EMAIL IS.....
L-28 (6 cyl) Exhaust Downpipe Flange 3/8" Mild Steel ***NO LONGER AVAILABLE***
I've dropped the price on these. I had a ton of them cut and only one has ever sold.
Allows the mounting of the rear rotor(non vented) from an '84 Nissan 200sx and the front caliper from a 1984 NISSAN PULSAR NX 1.6L. The non-vented rotor was specifically used to keep the weight down.
If you're interested in this kit, please contact Doug at 1200datparts@gmail.com
******* ALL PARTS ARE FOR SHOW USE ONLY! *******
Buyer is completely responsible for correct installation,
use of these products and any liability arising from their use.